China Energy-Saving Industrial Stationary Permanent Magnet Variable Frequency Screw Air Compressor best air compressor

Item Description


Merchandise description

one. High-efficiency everlasting magnet motors are much more power-effective than regular three-period asynchronous motors
two.The host adopts a new technology of profiled host, an integrated shaft composition, compact framework, secure procedure and substantial strength efficiency
3.Clever management, realistic design and style, higher dependability of the entire device, basic and handy every day routine maintenance
4.PID fuzzy management tends to make the force manage more correct and the equipment runs far more effortlessly

 

Specialized Parameter

 

 

Design Air shipping and delivery
(m3/min)
Power
kW

 

Sound

(DB)

Outlet diameter Dimension
(mm)
Weight
(kg)
.8Mpa Length Width Height
SEM-10A 1.01 seven.5 65±2 RP3/4 862 662 832 125
SEM-20A two.30 15 70±2 G3/four 1110 750 1571 236
SEM-30A three.40 22 70±2 G1 1210 800 1160 301
SEM-50A six.10 37 70±2 G1 1/two 1250 1571 1250 460

  

Comprehensive description

1.Rotor
Rotors are uneven in profile, backed up by ball bearings and roller bearings. Operates at a reduced speed, thereby low in abrasion and routine maintenance expenditures, air finish is long service life.

2.Manage panel
Intelligent microcomputer-dependent manage engineering can monitor and manage in all aspects the full equipment pursuing your recommendations, remote handle realizes unattended operation.

three.Oil filter
Rotary filters are used to totally eliminate the impurities in the lubricating oil, effortless to replace and free of charge of oil impregnate.

4.Air filter
Unique imported filter content,higher effectiveness 3 levels air separator, maintain internal cleanliness of the system efficiently.

five.Cooler
The cooler is found independently from the inner isolation of the chassis,so that the cooling supporters would suck air with normal temperature from exterior.Compared to cooling by utilizing the air of 45~65°Cinside the chassis,the cooling followers could help save in excess of 30% energy when the temperature of the air outlet decreases 3~8°C.

six.Exceptional top quality of motors
Professional tailored large effectiveness permanent magnet motor,When compared to normal motors, Long term magnet motor more outstanding vitality saving.defense quality:IP65

seven.The air end of compressor is of high effectiveness and prolonged existence
Superb CZPT bearings are adopted for compressor air finish to greater improve their use performance,minimize abrasion.and to comprehend prolonged time period procedure with no faults,lower sound and long daily life.

Application Industry

Air compressors are commonly utilized in industries to meet up with customers’ numerous gasoline needs,these kinds of as Industrial gear,pipelines, printing services, electric energy, metallurgy, oil&fuel, energy plants, shipbuilding, plastics, portray, textile, blow molding, steel market, chemical market, shipyard, machanical and so forth.

Business Profile

Dehaha Compressor was established in 1996 with over one hundred fifty skilled personnel and more than twenty five R&D engineersteams ‘ .
We focus on the analysis & produce,manufacture and vitality-conserving options of screw air compressor to create 
price for customers and culture.In 2018 our complete revenue volume approached fifteen million US dollars.By above 23 years
improved ordeals of developing,producing and advertising and marketing,today our valued customers are over 130 nations. Germany Standard and 13 years exporting expertise support us won a lot more than fifty faithful overseas agents.

Dehaha’s primary businesses target in following important places: 
Oil-injected rotary screw compressors 
Moveable screw air compressors 
Oil free of charge air compressors 
Substantial pressure air compressors 
Air remedy gear

At Dehaha,we receive our customers’ believe in and satisfaction by production the exceptional top quality compressed air
merchandise for all industries.All of our products are made for dependable functionality,simple upkeep,and highest
energy performance.We have revenue representatives who can converse English,Spanish,French,and Russian which helps make
it simpler for our consumers from all over the world to interact and negotiate with us.

Dehaha continuously innovates solution growth and administration to fulfill customers’ demand.The effective enterprise society and ongoing innovation make CZPT enhanced swiftly to get to the business basic principle”Strength Saving Initial, Mutual Price Shared”. CZPT mission is to be a globe-renowned high-finish manufacturer,with sustainable improvement,continuously enhancing its very own worth and sharing it with our clients and employees.Dedicated to provide our clients a silent and strength-saving made goods.
Certificates

 

Our exhibition

Our provider

one. 24h/7 after product sales help in diverse languages
two. Adhere to up the in merchandise in 2 months interval by electronic mail or contact
3.Assistance of set up and commissioning on web site can be provided by factory-skilled technicians
four. Specialized coaching for customers in CZPT air compressor manufacturing unit or working site.
5. a lot of drginal spare parts with confirmed high quality are all accessible from our stocks in Jianhgsu .
six. All kinds of complex documents in different languges.

FAQ

1.Why consumer decide on us? 

DHH SCREW COMPRESSOR ZheJiang CO.,LTD.with 23 years aged heritage,we are specialized in Rotary Screw Air Compressor.Germany Normal and thirteen a long time exporting expertise assist us won more than thirty faithful foreign brokers.We warmly welcome your modest demo order for high quality or market test.

two.Are you a manufacturer or trading firm?
We are expert maker with large modern factory in HangZhou,China,with skilled layout crew.Each OEM & ODM support can be acknowledged.

3.Exactly where is your manufacturing unit situated? How can I check out there?
Our manufacturing unit is positioned in HangZhou Metropolis, ZheJiang Province, China. We can pick up you from ZheJiang , it truly is about 1 hour from ZheJiang Xihu (West Lake) Dis. Airport to our factory. Warmly welcome to check out us!

four.What is your supply time?
380V 50HZ we can shipping and delivery the goods in fourteen days. Other electrical energy or other color we will shipping and delivery inside of 22 days,if urgently order,pls speak to our revenue in progress.

five.How lengthy is your air compressor guarantee?
One 12 months for the whole device and 2 many years for screw air stop, besides consumable spare components and we can offer some spare parts of the machines.

6.How does your manufacturing unit do concerning good quality handle?
Top quality is every thing. we often attach fantastic significance to good quality controlling from the quite starting to the very end. Our manufacturing unit has acquired ISO9001:2015 authentication and CE certificate.

7.How prolonged could your air compressor be utilized?
Usually, a lot more than 10 a long time.

8. What is actually payment phrase?
T/T,L/C,D/P,Western Union,Paypal,Credit history Card,and and so on.Also we could acknowledge USD, RMB, Euro and other forex.

9.How about your consumer services?
24 several hours on-line service accessible.forty eight hrs difficulty solved guarantee.

ten.How about your following-revenue support?
(1) Give customers with set up and commissioning on-line instructions.
(2) Nicely-qualified engineers obtainable to abroad provider.
(3) Globally brokers and after support accessible.

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Online Support
Warranty: 24montrhs
Lubrication Style: Lubricated

###

Customization:

###

Model Air delivery
(m3/min)
Power
kW
 

Noise

(DB)

Outlet diameter Dimension
(mm)
Weight
(kg)
0.8Mpa Length Width Height
SEM-10A 1.01 7.5 65±2 RP3/4 862 662 832 125
SEM-20A 2.30 15 70±2 G3/4 1110 750 1010 236
SEM-30A 3.40 22 70±2 G1 1210 800 1160 301
SEM-50A 6.10 37 70±2 G1 1/2 1250 1010 1250 460
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Online Support
Warranty: 24montrhs
Lubrication Style: Lubricated

###

Customization:

###

Model Air delivery
(m3/min)
Power
kW
 

Noise

(DB)

Outlet diameter Dimension
(mm)
Weight
(kg)
0.8Mpa Length Width Height
SEM-10A 1.01 7.5 65±2 RP3/4 862 662 832 125
SEM-20A 2.30 15 70±2 G3/4 1110 750 1010 236
SEM-30A 3.40 22 70±2 G1 1210 800 1160 301
SEM-50A 6.10 37 70±2 G1 1/2 1250 1010 1250 460

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Energy-Saving Industrial Stationary Permanent Magnet Variable Frequency Screw Air Compressor     best air compressorChina Energy-Saving Industrial Stationary Permanent Magnet Variable Frequency Screw Air Compressor     best air compressor
editor by czh 2023-01-14